Standard promo
IP-SY 200-5-47 Advanced TCA PSU solution
- 8.4ms HOLD UP AT FULL POWER OF 200W
- Patented Switched Boost Topology reduces hold up capacitance by 80%
- Boost supply tightly regulated to 59.5V to meet SELV requirements.
- No requirement for external hold up capacitors
- VOLTAGE OUTPUTS
- Isolated 3V3 IPMI Supply
- Isolated 5V BLUE LED Supply
- 6.6 watts of total power on IPMI
- Over-current Protection
- 5V INTERMEDIATE VBUS supply
- MECHANICAL
- Designed to be fitted in Zone 1/2 connector area and be used with AMC
- 47mm wide in Zone 1 area
- Low Profile (19.5mm total height above FRB) including hold up capacitors
- Surface Mount Samtec connectors combined with high power solder pins
- MONITORING
- 48VA and 48VB voltage monitoring available from A/D converter
- ENABLE_A and ENABLE_B monitoring available from A/D converter
- Input current and PSU_TEMP monitoring available from A/D converter
- All available on I2C interface referenced to 3V3 IPMI
- REGULATORY COMPLIANCE (pending)
- Meets CISPR 22 EMC requirements without the addition of external components
- ETSI, EN60950, Telspec1555
- UL approval
- Fully integrated fusing
- ACTIVE INRUSH CURRENT PROTECTION
- 5 times inrush current limit.
- Hiccup mode if over-current persists
- All input lines protected by fuses
- INTERMEDIATE VBUS CONTROL
- Secondary side ON/OFF control of INTERMEDIATE VBUS
- Secondary side sequencing of 2 additional core output rails
- HIGH EFFICENCY IPCM
- 0.5V input to output drop at full power
- Active FET based input voltage orring with reverse current protection
IPCM FEATURES
It provides a fully compliant solution and additionally integrates the control and supervision of low voltage core supplies simplifying the integration of Intelligent Power Managers within FRBs.
From a dual redundant –48V input the unit delivers 5V at up to 45A and includes a 3V3 IPM supply capable of delivering 2 amps for power management functions. An additional 5V 300mA supply is included to provide power for BLUELED or power up history circuitry.
The single mezzanine card meets the pitch requirements for ATCA with an overall height above the FRB of 19.5mm. The unit is dimensioned to ensure 48V primary side voltages are restricted to within the Zone 1 area of FRBs thereby avoiding clearance and creepage problems associated with the input circuitry. Connectivity to the FRB is via a combination of solder pins and SAMTEC 2mm pitch headers minimising assembly time and maximising packaging density.
This approach has the added advantage that the FRB can be manufactured using SMT connectors and only high power connections require soldering.
Contact us
Contact us for further information about the IP-SY 200-5-47 Advanced TCA PSU solution.
Back to topCustom power supply units
VISIONPOWER designs and builds custom power supplies to your specification.
VISIONPOWER quality systems are registered to ISO 9001 for the design, development and supply of high reliability electronic power supplies.
» View approvals
© Copyright 2007 VISIONPOWER Limited. All rights reserved.
Website design by Tinderhouse.